Skip to main content

Voice of the Mummy 1971

with Seance 1972 and Dark Tower 1981
Voice of the Mummy 1971  Mummy Box Hieroglyphs  Seance 1972  Dark Tower 1981  Sky Battle & Galaga  Mummy Boris Karloff  Mummy Blog  Mummy Contact Me   
FAQ's > Mummy & Seance Repair > Mummy Seance Parts > Mummy Slideshows > Mummy Directions > Mummy Sounds & Transcript > Mummy MP3 Player > Mummy Game Links >  

Scroll Down or Click on the Links above to See the Different Slideshows and Movies

Original Mummy Player

Made in West Germany player

Mummy Player Version 2.0

Made in USA player

Page Top

 

Game Slideshow

Seance Player

Made in USA player

Page Top

Page Top 

Here is a good example of a total strip and repaint with a King Tut Burial Mask applied!

 

 

Page Top

In this case, the factory applied the gold paint too dry.  The result were blobs of paint stuck in the sound grates and along all of the edges and into the recesses.   The only way to correct this was to strip it completely.  Some of the other units don't need as much work.  Additional gold paint can be stippled to have the same effect and will look excellent!  The last step was to apply the face mask of King Tut. 

 

The MB Mummy is holding 2 Flails.  I tried searching for a possible sarcophagus that MB might have used to model from.  Can anyone read hieroglyphics? Do any of these symbols mean anything? Mask Details

 

You really could keep going with adding more color and detail!  I would like to see what an experienced modeler could do! Here is a good example from


Mobious Models - The Mummy 

 

Three Excellent Examples of

What Can Be Done to Save a Record Player!

 

 

 

 

Rebuild One

 

This is a good reason not to discount the potential of a mummy player that has damage from severe battery corrosion and an attempted repair.  As long as the basic case isn't damaged the parts can be replaced.
 
 
 
 
 
 
 
 
 

 

 

 

Rebuild Two

 

Here is a unit received that had a previous repair made to compensate for a failed motor.  I can tell a lot of time was spent in solving many problems.  As always, this is a good reason not to discount the potential of a Mummy Player for repair.  As long as the basic case isn't destroyed the parts can be replaced.

 

 

  

 

Page Top

 

 

Rebuild Three

 

Here is a unit received that had a previous repair made using a wooden block to compensate for corroded battery contacts. Maybe the player being broken, the center of the record was cut out to fit on a 45 RPM record player!  The block was left installed because the epoxy caused severe distortions in the plastic that couldn't be repaired.
 
  
 
 

Battery Contact Repairs

Scroll down the see several repairs from severe battery corrosion. 

The results are... "good as new!"

Before

After

Completely Corroded and the positive terminal burned through.

All new brass terminal contacts and replaced the missing plastic.

All 3 major contacts were no longer useable.

3 Contacts Replaced.

Severe battery corrosion to the contacts.

The contacts were reusable after cleaning.

USA version of player with contact corrosion.

The 3 contacts were not reuseable. They were replaced.

Another USA player with an attempted repair.

Same results as above. Also replaced switch cover.

Battery corrosion with an attempted repair.

The 3 major contacts were replaced.

 Another Attempted Repair from Serious Corrosion!

 3 New Contacts and New Switch Contact Stiffner Bar.